How to Flash Stock Rom Using Smart Phone Flash Tool

If you have a Smartphone with Mediatek Chipset and you want to know how to Flash Stock Firmware (Stock Rom) in Windows Computer using the Smart Phone Flash Tool. So in this article we will learn about this in detail how you can flash Stock Rom in any Smartphone with Mediatek Chipset, so read this article to the end to know.

Requirement: Before starting the process of Stock Firmware Flashing, you should confirm that your Phone is at least 50-60% Charge. If not, then charge your phone as soon as possible. Otherwise your Stock Rom Flashing process will not be completed properly.

Flash (Mediatek Chipset) Stock Rom Using Smart Phone Flash Tool

Step 1: Firstly, Download the USB Driver in your computer from Download Button and Install it in your Computer. If your computer already has a USB driver installed, then you can skip this step.

Download CDC USB Driver

Step 2: Now when you have a USB driver installed in your computer, you can Power off your Phone now. Also remove the phone’s battery if it is removable. Flash Stock Rom Using SP Flash Tool

Step 3: Now you have to download Stock Rom or Custom ROM of your phone.To download Stock Rom or Custom Rom of your phone, you can download Stock Firmware according to your Phone Model on “Stockflashfile.com“. After downloading ROM, extract it in your computer.

Click To Download Stock Rom

Step 4: Next you have to Download the Smart Phone Flash Tool (SP Flash Tool) and extract it on your computer. After extract, you will see a file like this, as shown in the photo below.(Keep in mind that in almost all Stock Rom, you get an inbuilt SP Flash tool that you can use to flash stock ROM in the phone).

Click To Download SP Flash Tool

Flash Stock Rom Using SP Flash Tool

Step 5: Now you have to open Flash_tool.exe that you extracted in Step #4. (Note that you have to open Flash as an Administrator by right clicking on Flash_tool.exe so that your flashing will be complete without any errors.Flash Stock Rom Using SP Flash Tool

Step 6: When your SP Flash tool opens, you simply have to click on Download Tab as shown in the photo.Flash Stock Rom Using SP Flash Tool

Step 7: Next you have to click on Scatter Loading as you can see in the image.

Flash Stock Rom Using SP Flash Tool

Step 8: After clicking Scatter Loading, you have to locate your scatter file. (The Scatter File is in stock ROM’s Firmware folder Which you extracted in step #3).

Flash Stock Rom Using SP Flash Tool

Step 9: After selecting the scatter file you have simply click on Download Button. as you can see in the image.Flash Stock Rom Using SP Flash Tool

Step 10: Now you have to connect your phone to computer with the help of Original USB Cable. Note that if your phone’s Battery is removable, then connect it by removing it. When you connect the phone, press Volume Up or Volume Down key of the phone once. The computer will easily detect your phone. (If your computer does not detect your phone, then your USB driver may not be installed correctly.)

Step 11: Your flashing process will start automatically when your phone is connected to the computer correctly. You have to wait for some time. Once your flashing process is complete, you will have a Green Pass Massage Show on the Computer screen.Flash Stock Rom Using SP Flash Tool

Step 12: When you have a green pass massage show on the Computer screen, you have to close the Smart Phone Flash Tool (SP Flash Tool) and disconnect the phone from the computer. 

Step 13: Congratulations your phone has been successfully flashed. Now you can Power On after inserting Battery in the phone.

Last Word -:

Friends, if you are facing any problem in phone flashing, then you can contact us through the comment box, so that we will help you as much as possible.

2 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here